We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Earthquake-resistant reinforcement brackets.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

Earthquake-resistant reinforcement brackets - List of Manufacturers, Suppliers, Companies and Products

Earthquake-resistant reinforcement brackets Product List

1~15 item / All 32 items

Displayed results

Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 12.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It limits the maximum protrusion of the site-side angle post to approximately 65mm, allowing for passage even after installation, thus maintaining convenience in narrow or densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. FIT Power Type 12 is compatible with block walls of H1,200mm from the road surface. *We have models available for block walls ranging from H1,200mm to H1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering at Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic reinforcement fittings for concrete block walls, 'FIT Power' Type 16

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that enable earthquake resistance construction in a short period with minimal work.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It limits the maximum protrusion of the angle support on the site side to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it allows a single worker to perform tightening work from the site side, enabling a reduction in construction time. The FIT Power Type 16 is compatible with block walls of H1, 600mm from the road surface. *We also have types available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free rotation ■ Design that maintains convenience even in narrow spaces - Residents can pass through after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 18

Can be installed in narrow areas such as densely populated urban residential areas! Seismic reinforcement brackets that enable earthquake resistance construction in a short period with minimal work.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, since tightening work can be done by one worker from the site side, it allows for a reduction in construction time. The FIT Power Type 18 is compatible with block walls of H1, 800mm from the road surface. *We have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patented as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FIT GATE Construction Case: FIT GATE

The dimensions are W14m × D6.1m × H3.5m! Installation case with body mounting, completed in 2 days with 3 workers.

We would like to introduce a case where we delivered the "FIT GATE." The dimensions are W14m × D6.1m × H3.5m, with the structure installed, taking 2 days with 3 workers. It features partition walls made of reinforced glass FIT, a garage roof, and a folded plate GL steel sheet covering. There is an existing foundation on the north side. On the backside, there are middle windows and a side entrance sliding door. Please feel free to consult with us when you need our services. 【Case Overview】 ■Dimensions: W14m × D6.1m × H3.5m ■Required Days: 2 days with 3 workers *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FIT GATE construction example: General door + shutter gate (slab roof)

The universal door has a slab roof! It is a shutter exposure type structure where the shutter case is visible from the back.

We would like to introduce a case where a gate that integrates a general-purpose door and a shutter gate was manufactured and delivered as a FIT GATE. The roof of the general-purpose door features a partially cut-out slab roof, with a shutter exposure type structure that allows the shutter case to be visible from the back. After the structure was installed, finishing work such as wall tiling and fixture installation was carried out by the contractor, and it was completed. 【Case Overview】 ■ Dimensions: Approximately W11,400 × H2,925 mm (total length) ■ Installation time: Approximately 7 hours *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FIT GATE construction example: General door + shutter gate 16

A carport and roof have been installed behind the gate, designed for an approach that stays dry in the rain!

We would like to introduce a case where a gate that integrates a service entrance and a shutter gate was manufactured and delivered at a certain location in Aichi Prefecture. Due to the effective opening height of H2,600mm, it was manufactured in sections and connected on-site. After the installation of the structure, finishing work such as shutter installation and wall finishing was carried out by the contractor, and the gate was completed. The exposed case type helps to reduce costs and creates a gate with a smaller depth, resulting in a neat impression. 【Case Overview】 ■ Dimensions: Approximately W9,510 × H3,225mm ■ Installation Time: Approximately 5 hours *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FIT Power Construction Case: Public Facility <Mannen Wall>

Since the protrusion is smaller than the retaining wall, it can be installed while maintaining space without affecting the equipment!

We would like to introduce a case where a FIT Power permanent fence compatible model was installed during the renovation of a permanent fence at a public facility in Aichi Prefecture. The lateral reinforcement was arranged by the construction company and installed along with the FIT Power. By installing the FIT Power on the existing fence and retrofitting it for seismic resistance, we can complete the work in a shorter period with less extensive work compared to demolition and replacement. 【Case Overview】 ■ Location: Public facility in Aichi Prefecture ■ Since the projection is smaller than that of a retaining wall, it can be installed while maintaining the usual space without affecting the equipment. *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FIT Power Construction Case: High School

A case where the conventional site space has been maintained even after installation!

This is an example of the seismic reinforcement of a block wall located within the grounds of a certain high school in Saitama Prefecture, where FIT Power (standard specification type 18) was adopted. Although a retaining wall was installed on the block wall, FIT Power was added as additional reinforcement. FIT Power has a smaller projection than the existing retaining wall, allowing the original site space to be maintained even after installation. [Case Overview] - Location: Within the grounds of a certain high school in Saitama Prefecture - There is a road and a neighboring plate installed on the adjacent side, but there is no projection that narrows the site, and it does not stand out too much. *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FIT Power Construction Case: Private Residence

It is inconspicuous in appearance and neat! The image of the gate remains the same as before.

We would like to introduce a case study of the FIT Power installation at a private residence. With the new carport installation, the gate pillar on the right side of the front became a standalone column. Given that this could lead to collapse damage in the event of an earthquake, we applied seismic reinforcement using FIT Power. The result is a renovation that maintains the original image of the gate while being discreet and streamlined in appearance. 【Case Overview】 ■ FIT Power typically accommodates block thicknesses up to 150mm, but in this case, we used a thickness of 250mm. *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FIT Power Construction Example: Substation

Introducing a case where FIT Power was adopted for seismic reinforcement of the boundary wall of a substation!

We would like to introduce a case study of FIT power installation at a substation. Installed on both the road side and the property side. FIT power was adopted for the seismic reinforcement of the boundary wall. Feel free to consult us about anything related to exteriors, including seismic exteriors, seismic reinforcement, the Japanese-style gate "Sukiya-mon," installation work, delivery times, and individual inquiries. [Installation Locations] - Road Side - Property Side *For more details, please refer to the related links or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FIT Power Construction Case: Apartment

We would like to introduce a case where the FIT Power 20 type (made to order) was installed for seismic reinforcement of boundary walls!

We would like to introduce a case study of FIT power installation in a condominium. On the property side, there is a bicycle parking area, but it does not become cramped, allowing for parking as usual. A road and a neighboring plate have been installed on the side adjacent to the neighboring property. The plate is thin, so it does not obstruct passage, and since the construction can be completed in a short period, we can carry out seismic reinforcement work that takes into consideration the lives of the condominium residents and nearby neighbors. 【Case Overview】 ■ Bicycle parking can be done as usual without feeling cramped. ■ Seismic reinforcement work can be carried out with consideration for the lives of the condominium residents and nearby neighbors. *For more details, please refer to the related links or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FIT Power Construction Case: Eternal Fence

Supports long-lasting walls! Since it is a made-to-order product, the manufacturing lead time is approximately up to 1 month.

We would like to introduce a case study of FIT power installation with a ten-thousand-year wall. One set is installed between the columns. As this is a made-to-order product, the manufacturing lead time may take up to approximately one month. For details regarding delivery times and other inquiries, please contact us. 【Features】 ■ One set installed between the columns ■ Manufacturing lead time is up to approximately one month *For more details, please refer to the related links or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FIT Power Construction Case: Seismic Reinforcement of a Permanent Wall

There are almost no protrusions! Here is an example installed on a perpetual wall in a certain location in Tokyo.

We would like to introduce a case study of FIT Power installation for seismic reinforcement of the Mannen Wall. One set of FIT Power is installed between each pair of columns to carry out seismic reinforcement. On the parking lot side, only the plates are visible, and there is hardly any protrusion, allowing the parking space to remain the same size as before. On the site side, angle supports have been installed. [Case Overview] - One set installed between each pair of columns - Parking space can be used at the same size as before *For more details, please refer to the related links or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sukiya-style gate construction example: Shrine building

We had the honor of manufacturing the shrine building of Akiba Shrine located in Gifu Prefecture!

We would like to introduce a case study of construction at a shrine. We manufactured the main hall of Akiba Shrine, which is adjacent to the famous Nemeido Shrine, commonly known for "Monet's Pond," located in Itadori, Seki City, Gifu Prefecture. Construction images are also available in the related links. Feel free to consult us about anything related to exteriors, including seismic-resistant exteriors, seismic reinforcement, and traditional Japanese gates such as "Sukiya-mon," as well as installation work, delivery times, and individual inquiries. [Case Overview] ■ Location: Gifu Prefecture ■ Construction Site: Main Hall of Akiba Shrine *For more details, please refer to the related links or feel free to contact us.

  • Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sukiya Gate Construction Examples: Sukiya Style and Shoin Style

A symbol of Japanese culture! We combined an authentic shoin-zukuri style house with an elegant wall.

We would like to introduce examples of Sukiya-style and Shoin-style construction. We combined an elegant fence with a genuine Shoin-style residence. Sukiya-style and Shoin-style are symbols of Japanese culture. Feel free to consult us about anything related to exteriors, including seismic-resistant exteriors, seismic reinforcement, the Japanese-style gate "Sukiya-mon," installation work, delivery times, and individual consultations. 【Case Overview】 ■ Combined an elegant fence with a genuine Shoin-style residence ■ Symbol of Japanese culture *For more details, please refer to the related links or feel free to contact us.

  • Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration